|
|
Post by jonny on Feb 12, 2015 23:30:31 GMT
I've bought a whyte 901 which is a phenomenal piece of kit but the cranks, bb etc are average. I've got an XTR crankset with zee shifter, 1x10 set up with a on up 42t sprocket to go on.
My slightly drunken question is, can I leave the sram bb on to go with the XTR cranks?
|
|
|
|
Post by Nelly on Feb 13, 2015 8:45:00 GMT
don't think so, think the Sram use a slightly smaller diameter axle
and also don't they clamp differently? think the BB's are designed differently as sram compress on the BB but shimano lightly squeeze and use pinch bolts?
I could be wrong, I often am
|
|
|
|
Post by Admin on Feb 13, 2015 8:58:53 GMT
Unfortunately they are not cross compatible SRAM cranks are narrower on the drive side so you wouldnt be able to fit the Shimano HT2 crank through.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 13, 2015 10:11:24 GMT
Well it's certainly different - for me it normally goes this way.... 'Help, I've started drinking and then bought a new bike....'  |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Feb 16, 2015 10:27:40 GMT
Well it's certainly different - for me it normally goes this way.... 'Help, I've started drinking and then bought a new bike....' That would never happen to me.. It's usually "help, I've started drinking and fallen asleep" Got through about 12 eyebrows doing this. |
|
