Post by kirky72 on Oct 10, 2014 10:03:27 GMT
Picking up a new frame which is apparently according to Canyon is Press-Fit/ 89,5 mm/41mm
Looking around I can find what I think is the right BB but crankset wise they don't seem to show the width only if they are coming with a BB they may say fits 73mm BB shell. Nothing shows as 89.5mm.
I'm confused by this or is it just a case that less of the spindle will be showing due to the bottom bracket being wider. So concentrate on the right BB for the shell and the cranksets will be okay as long as they are the right type eg hollowtech, octolink GXP etc.
I'm looking for a single ring narrow wide and was looking at the raceface evolve or turbine Cinch. If anybody can tell that I would be okay with these and the relevant BB or recommend any other single narrow wide crank for circa £150 I would be very greatful.
The frame is a Canyon grand canyon CF 2014.
Looking around I can find what I think is the right BB but crankset wise they don't seem to show the width only if they are coming with a BB they may say fits 73mm BB shell. Nothing shows as 89.5mm.
I'm confused by this or is it just a case that less of the spindle will be showing due to the bottom bracket being wider. So concentrate on the right BB for the shell and the cranksets will be okay as long as they are the right type eg hollowtech, octolink GXP etc.
I'm looking for a single ring narrow wide and was looking at the raceface evolve or turbine Cinch. If anybody can tell that I would be okay with these and the relevant BB or recommend any other single narrow wide crank for circa £150 I would be very greatful.
The frame is a Canyon grand canyon CF 2014.
