|
|
Post by richardm on Jan 12, 2015 20:11:01 GMT
lately have been having real problems with my rear cassette slipping in tenth, its a new xt cassette and new chain, and one up 42 tooth expander new mesh as well, but long cage so have ordered new med cage mesh and a radcage do you think this will, stop it i have indexed the gears and it works fine on the stand but under load it slips like mad
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 12, 2015 20:12:17 GMT
I just fitted the med slx cage and it worked fine mate ..
|
|
|
|
Post by windysurfer on Jan 12, 2015 20:44:57 GMT
I ran the same setup, xt 11-36 and a shadow plus long rear mech. Shifting was ok but not prefect so I bought a medium inner cage and a one up radcage and now the shifting is spot on.
I only had issues going up and down the gears ,once in gear it was fine.
|
|
|
|
Post by lowcogger on Jan 12, 2015 21:02:38 GMT
When i first went 1x10 i was 11-42 with medium xt mech,gear changing was a total nightmare and impossible to set B tension screw correctly. Fitted the rad cage and it sorted everything out,no probs at all.
|
|
|
|
rad cage
Jan 12, 2015 21:03:47 GMT
via mobile
Post by notsarkyadam on Jan 12, 2015 21:03:47 GMT
XTR cassette and XTR medium mech... Had no issues, had a rad cage... But didn't bother to fit it... Sold it Will..
|
|
|
|
Post by will on Jan 13, 2015 20:03:40 GMT
XTR cassette and XTR medium mech... Had no issues, had a rad cage... But didn't bother to fit it... Sold it Will.. And i shall be forever gratefull - sorted out my sloppy shifting and stopped the chain dropping down a couple of gears when back pedaling. |
|
|
|
rad cage
Jan 13, 2015 20:49:21 GMT
via mobile
Post by notsarkyadam on Jan 13, 2015 20:49:21 GMT
XTR cassette and XTR medium mech... Had no issues, had a rad cage... But didn't bother to fit it... Sold it Will.. And i shall be forever gratefull - sorted out my sloppy shifting and stopped the chain dropping down a couple of gears when back pedaling. That's the Hope Ring.. Common fault as the shifting ramps aren't machined correctly.. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jan 13, 2015 21:57:06 GMT
Will, don't pedal backwards then  |
|
|
|
Post by will on Jan 14, 2015 23:02:04 GMT
And i shall be forever gratefull - sorted out my sloppy shifting and stopped the chain dropping down a couple of gears when back pedaling. That's the Hope Ring.. Common fault as the shifting ramps aren't machined correctly.. Yes, that appears to be the case as many users seem to have the same problem - Rad cage sorted it though. |
|
|
|
Post by will on Jan 14, 2015 23:04:15 GMT
Will, don't pedal backwards then Have to - it allows people to catch up  |
|
