|
|
Post by lowcogger on Mar 1, 2015 13:34:49 GMT
currently my rear hope pro 2 evo is standard 9mm qr. what do I need to convert to 10mm bolt through? my good friend roundie has got a spare axel so is it just a case of getting the correct end caps and bolts and will these just fit into the standard drop outs? gracias. |
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 1, 2015 13:48:25 GMT
Not sure about the 10mm thing. Seems a strange size does that!
With Pro 2 Evo hubs, you usually just change the end caps, not the axle. With older non Evo Hope hubs you'd need to change the axle too.
If you're converting to a bolt thru hub, you'd need bolt thru dropouts ie, not QR dropouts
|
|
|
|
Post by lowcogger on Mar 1, 2015 14:24:29 GMT
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Mar 1, 2015 14:31:23 GMT
Ahh,fun bolts. Looks like you got it sorted  |
|
|
|
Post by lowcogger on Mar 1, 2015 14:47:30 GMT
just got to work out why I want to change it now,can I put it down to tartiness?
|
|
|
|
Post by Chopper on Mar 1, 2015 14:48:47 GMT
|
|
|
|
Post by lowcogger on Mar 1, 2015 15:14:27 GMT
|
|
|
|
Post by matthews on Mar 1, 2015 15:35:19 GMT
If it's an evo , just the end caps , I use one of the superstar 10mm qr's and it seems to work fine (no spanners required )
|
|
|
|
Post by matthews on Mar 1, 2015 15:36:35 GMT
Rear dropouts are 10mm btw and fronts are 9, measure the little lugs that slide into the dropout on your end caps and it will all become clear
|
|
|
|
Post by lowcogger on Mar 1, 2015 15:54:55 GMT
Rear dropouts are 10mm btw and fronts are 9, measure the little lugs that slide into the dropout on your end caps and it will all become clear yep,that`s what was confuddling me earlier.i was thinking I had to replace the axle to have something to bolt into but when I`d read the crc reviews the penny dropped. |
|
|
|
Post by andyr on Mar 1, 2015 17:29:31 GMT
As it happens I've got a set of Hope 10mm converters and a 10mm qr from superstar (red handle) in need of a new home if you're interested.
|
|
|
|
Post by lowcogger on Mar 1, 2015 18:43:37 GMT
pm`d you andy.
|
|
