|
|
Post by bigal on Jun 10, 2016 20:18:37 GMT
While i am off the bike for the next 2 months (broken collar bone)
Going to strip the Five and get it resprayed.
I was thinking of changing from 1x10 to 1x11,
my question is, what is the difference between 10 and 11 speed mechs as i have a new rear 10 speed mech on the bike.
surely it would be the shifter that denotes where the mech goes.
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 11, 2016 7:46:40 GMT
That I don't know - have you considered the Sunrace route? Myself and loads others have gone down that route and it's great - you don't need to change anything then - just pop on your new cassette and hey presto - 11-42 and no ugly and crap shifting pussy cog.
Why spend hundreds when you can spend 60?
|
|
|
|
Post by notsarkyadam on Jun 11, 2016 7:48:54 GMT
Perry is bang on... Why bother with 11 speed, when you can have the same range with a 10 speed.. For a 3rd of the cost...
|
|
|
|
Post by bigal on Jun 11, 2016 8:30:43 GMT
That I don't know - have you considered the Sunrace route? Myself and loads others have gone down that route and it's great - you don't need to change anything then - just pop on your new cassette and hey presto - 11-42 and no ugly and crap shifting pussy cog. Why spend hundreds when you can spend 60? this why i come here, great advice. i had forgotten about that option. |
|
|
|
1x11 mech
Jun 11, 2016 9:13:08 GMT
via mobile
Post by bigal on Jun 11, 2016 9:13:08 GMT
Dam there are so many which ones did you go for mx 8 or mx 3 or ms 3?
|
|
|
|
1x11 mech
Jun 11, 2016 9:16:05 GMT
via mobile
Post by jack on Jun 11, 2016 9:16:05 GMT
Iv gone mx3 and I'm sure moto is the same
Shifts lovely and smooth! Had it sine February and not had a problem with it yet (other than I bent it but I bent it back and been fine since haha)
Range us great you can get up anything quite happily
I had a radR cage and a one up oval ring put in at the same time, it's a dream to ride
|
|
Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jun 11, 2016 9:50:36 GMT
What Jack says - along with a wobbly ring up front (21 quid from Works components) - the MX-3 deffo. It's lighter than the 8 but basically has red and black colourway and looks prettier  Running mine on a standard XT medium clutched rear mech and it shifts lovely - dead smooth. Got mine here but you might find em a couple of quid cheaper on fleabay? but I like Charlie. Charlie |
|
